Taprite Secondary Dual CO2 Regulator (160 PSI) [T5272SN-375]

Premium Taprite 2-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.

Solid brass body with 3/8" MFL inlet. Regulator has "shut down" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports. The bonnet is made from Polycorbonate. The regulator is approved for CO2.

Secondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.

A secondary regulator will allow you to regulate the pressure of each keg individually.

Features 1/4" MFL outlets (Right hand thread).

OntarioBeerKegs is an official distributor of Taprite.

---

Specifications:

• To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 125-130 PSIG.
• Taprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.
• Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
• Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2
• Polycorbonate Bonnet
• 3/8" MFL inlet (Right hand thread)
• Body parts are 1/4" NPT (Right hand thread)
• 1/4" MFL outlets (Right hand thread)
• Left side has a 1/4" NPT plug
• Working Pressure Range 0-155 PSI
• Front loading seat assembly is easily replaceable in the field
• Comes with wall mounting brackets
• 0-160 PSI high pressure gauges (Right Hand Thread)