Stainless Steel Sanke "S" Style Keg Coupler With 304 S.S Probe - Black Handle

The Stainless Steel "S" Style Sanke Coupler is constructed from durable 304 stainless steel and is NSF approved. The body, probe, and tailpiece are all made from stainless steel, ensuring that beer only comes into contact with sanitary stainless steel. It features a high-capacity 55-PSI pressure relief valve built directly into the coupler body. When used with other relief devices in the system, it prevents the keg from exceeding recommended working pressures. Additionally, it allows the user to relieve pressure to prevent or correct dispensing issues. The black pull lever handle controls the flow of gas: the up position is off, and the down position is on.

To install rotate clockwise on the keg valve until secure. Pull the lever handle and push down; this opens the keg valve and pressure inlet on the coupler. You are now ready to dispense. This coupler can be quickly dismantled for cleaning and periodic service. No special tools required.

The gas port is 3/8" OD in diameter and will fit hose with an ID of 3/8" or 5/16".

Sanke "S" style couplers are used by many European breweries. It has a longer probe than a "D" style coupler.

Please Note: A Tail Piece Assembly is recommended as these parts are needed to properly hook up a Sanke Coupler to tubing.

---

Specifications:

• Material: 304 Stainless Steel
• Finish: Polished Stainless Steel
• Tailpiece Material: 304 Stainless Steel
• Probe Material: 304 Stainless Steel
• Type: "S" Style
• Handle Type: Short Handle
• Handle Colour: Black
• Tail Piece: 3/8" OD Barb
• Beer Port Size: 7/8"-14 (5/8" BSP) (U.S. Beer Industry Standard)

Find Your Brand:
(Always confirm with the store when purchasing the keg if it will be compatible.)

Sanke Coupler Chart