Taprite Primary CO2 Regulator w/ Poly Bonnet (60 & 2000 PSI) [T742HP]

Taprite Primary CO2 Regulator w/ Poly Bonnet (60 & 2000 PSI) [T742HP]

  • $122.99

Featuring gauges with a maximum range of 60 PSI (out) and 2000 PSI (in), this primary CO2 regulator by Taprite comes with CGA320 (in) and 5/16" Barb (out) connections. Safeguarding against backflow, this regulator is equipped with a check valve.

Boasting a polycarbonate bonnet and a safety pressure relief valve set at 55 - 60PSIG, this regulator provides a working pressure range of 0 to 50 PSI.


  • To protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.
  • Internal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.
  • Forged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.
  • Polycorbonate Bonnet
  • CGA320 Inlet (Left hand thread)
  • Body parts are 1/4" NPT
  • 5/16" OD barbed shut-off valve with check (Right hand thread)
  • Working Pressure Range 0-50 PSI
  • Front loading seat assembly is easily replaceable in the field.
  • 0-60 PSI low pressure gauge (Right Hand Thread)
  • 0-2000 PSI high pressure gauge (Left Hand Thread)


  • 7 5/8" Wide
  • 7 1/2" Tall

We Also Recommend