Circular Round Hole Punch, Knockout Die - 32mm

Circular Round Hole Punch, Knockout Die - 32mm

  • $15.49


If you are thinking of adding a heating element to your brew kettle this 32mm Circular Round Hole Punch, Knockout Die will drill a hole approx. 1 1/4" in diameter. A pilot hole will be needed first in your 1.5mm Stainless Steel or 3mm thick sheet steel.

Please Note: If you choose to drill a hole into any equipment that you have purchased from Canuck Homebrew Supply, we will NOT replace or accept returns on those products.

Details:
  • Can be used with sheet steel up to 3mm thick
  • Can be used with stainless steel up to 1.5mm thick
Instructions:
  • Using your stepped drill bit drill a pilot hole into your kettle/vessel
  • Insert the bolt into the pilot hole
  • Attach the die and punch portions together
  • Use ring spanner to tighten the bolt
  • Keep tightening the bolt until you hear the click sound of the punch passing through the steel
  • Remove the assembly from the hole and screw the die and punch portions apart
  • Remove and throw away the cut out steel

We Also Recommend