35L BrewZilla V3.1.1 All Grain Brewing System

  • $549.99

Newest version on the market

  • *New and Updated Circuit Board for 2020*
  • New "Easy Dump" Handle
  • New Vented Bottom
  • New "Easy Grip" Feet

Please Note:
 This model doesn't need the silicone seal at the top of the mash pipe.

Everyone should first read the manual before brewing with the BrewZilla for the first time. If you don't have it anymore, you can download it here.

Built into the BrewZilla are heating elements (for heating and boiling), a pump (for recirculation), a water-resistant control panel (for settings and monitoring), a removable grain basket, and a built-in spigot (for transferring).

It uses 110v power allowing it to be used almost anywhere. Built to make batches up to 30L, with a total capacity of 35L (9.24 gal).

Please Note:

The lid for these units is designed to be airtight. It is normal to push them in with force and use the clamps to secure in place.

The bottom panel on these units gets bent around 10% of the time while shipping. An easy fix is to remove three screws and lightly bend it back. It is a nuisance but a quick easy fix.

This unit needs to be cleaned before use or testing to remove manufacturing oils. Failure to clean it first will cause some staining that will need to be removed with 
Bar Keepers Friend Cleanser.

  • Stainless Steel Immersion Chiller
  • Digital Backlit Temperature Controller
  • 110v Plug and Power
  • Stainless Steel 1/2" BSP Ball Valve with 1/2" OD barb
  • Magnetic drive pump in the base of the unit
  • Dual Heating Elements (1000w and 500w)
  • Glass Lid
  • Stainless Steel recirculation arm
  • This model doesn't need the silicone seal at the top of the mash pipe
  • *New and Updated Circuit Board for 2020*
  • 35L (9.24 gal) Capacity
  • Delay Start Timer
  • Step Mash Functionality
  • Stainless Steel Body
  • Interior Volume Markings
  • Displays temperature in both °C and °F

We Also Recommend