Chugger Brew Pump - Center

  • $204.99

Whether you need to move the hot wort between the vessels or the cold water through the chiller, the Chugger Brew Pump – Center provides the optimal flow rate and temperature tolerance to perform all the liquid transfer tasks in your brewing system.

Its compact design and sturdy construction featuring only FDA approved materials make the Chugger pump a no-brainer addition for homebrew systems of different sizes and designs. And the center inlet configuration provides additional convenience when incorporating the pump into your brewing setup.


Description: The Chugger Brew Pump has already become a classic for homebrewers, as it"s compact, sturdy, reliable and very easy to use. With 7 gallon per minute pump rate, you will be able to move the liquids between the vessels in no time, even when brewing large batches.

The maximum liquid temperature the pump housing can withstand is 250F (121C), which is much higher than the common liquid temperatures in your brewhouse. The stainless steel head ensures that the connections can be tightened as hard as they can without the risk of damaging the pipe. The 3/4 inch inlet may require a reducing coupler depending on your system.
  • Chugger SS Center
  • 3/4" NPT Inlet (You may require a reducing coupler)
  • 1/2" NPT Outlet
  • 316 Stainless Steel Front Housing
  • 316 Stainless Steel Rear Housing
  • Teflon Thrust Washer
  • CLEAR Silicone O-Ring
  • Polysulfone Impeller
  • Max Flow 7 GPM 22.7 LP
  • Max Head 18.6 FT 4.1M
  • Electrical 115V 50/60HZ
  • Non-Submersible
  • 60HZ 50HZ
  • Can handle liquids of 250°F
  • Materials are FDA Food Compliant
  • Components are UL Recognized

We Also Recommend