{"title":"Secondary Regulators","description":"","products":[{"product_id":"taprite-secondary-5-way","title":"Taprite Secondary Five Way CO2 Regulator (60PSI) #T1695ST","description":"Premium Taprite 5-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-5-way-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-5-way-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597835910,"sku":"taprite-secondary-5-way","price":572.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/32019-1-v2.jpg?v=1750795676"},{"product_id":"taprite-secondary-5-way-thru","title":"Secondary Five Way Pass Through CO2 Regulator (60PSI) #T1695ST-2N","description":"Premium Taprite 5-Way Secondary Pass-Thru CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003ePass-Thru regulators have 5\/16\" OD barbs on each side allowing you to attach tubing.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePass-Thru design allows full pass-thru through the body\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597907974,"sku":"taprite-secondary-5-way-thru","price":585.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/32024-1-v2.jpg?v=1750795645"},{"product_id":"taprite-secondary-dual","title":"Taprite Dual Product Secondary CO2 Regulator (60PSI) #T1672ST","description":"Premium Taprite 2-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-dual-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-dual-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597908166,"sku":"taprite-secondary-dual","price":230.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/28779-1-v2.jpg?v=1755626287"},{"product_id":"taprite-secondary-quad-deluxe","title":"Taprite Quad Secondary CO2 Regulator (60PSI) #T1694ST","description":"Premium Taprite 4-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-quad-deluxe-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-quad-deluxe-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597908230,"sku":"taprite-secondary-quad-deluxe","price":519.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/32023-1-v2.jpg?v=1750795642"},{"product_id":"taprite-secondary-regulator","title":"Single Product Secondary CO2 Regulator (60PSI) #T1661ST-10","description":"This Premium 1-Way Secondary CO2 Regulator from Taprite is NSF Approved \u0026amp; approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThe regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.), Solid brass body. a heavy duty UL rated dual gauge, right hand (RH) threaded ports. The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank, and you want to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 1\/4\" MFL valve output connection (does NOT include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e1\/4\" MFL valve outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597910022,"sku":"taprite-secondary-regulator","price":125.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/21838-1-v2.jpg?v=1750795638"},{"product_id":"taprite-secondary-tri","title":"Taprite Triple Product Secondary CO2 Regulator (60PSI) #T1683ST","description":"Premium Taprite 3-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off check valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-tri-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-secondary-tri-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597915846,"sku":"taprite-secondary-tri","price":332.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/28780-1-v2.jpg?v=1750795636"},{"product_id":"sr-1p-thru-5-16in-60lb","title":"Taprite Single Product Secondary Pass Through CO2 Regulator (60 psi) - 5\/16\" Barbs - #T1661STC-01","description":"Premium Taprite 1-Way Secondary Pass-Thru CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003ePass-Thru regulators have 5\/16\" OD barbs on each side allowing you to attach tubing.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valve.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePass-Thru design allows full pass-thru through the body\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045795930118,"sku":"sr-1p-thru-5-16in-60lb","price":110.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50283-1-v2.jpg?v=1750794550"},{"product_id":"sr-2p-mount-5-16in-60lb","title":"Taprite Secondary Wall Mounting Dual Product Regulator w\/ Beer Line Connectors (60 psi) #T1672STWMK","description":"This secondary dual product regulator from Taprite has two 60 PSI gauges, and a 5\/16\" OD barbed inlet, and 5\/16\" OD barbed outlets with built in check valves.\u003cbr\u003e\u003cbr\u003eIt has a beautiful brass body construction, and has wall mounting brackets, pre-mounted on an easy to install wall mounting panel. The panel itself has two 1\/2\" Male NPT 'Y' style beer line fittings, making it great for building a well organized kegging station.\u003cbr\u003e\u003cbr\u003eSecondary regulators allow for more precise control of pressure, and the gauges can each be used to dispense a different keg at a different pressure.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" barbed inlet designed for 5\/16\" I.D. pressure tubing.\u003c\/li\u003e\n\u003cli\u003eLeft side has a 1\/4\" NPT plug\u003c\/li\u003e\n\u003cli\u003eWorking pressure range is 0-50psi.\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e60psi Gauges\u003c\/li\u003e\n\u003cli\u003eStainless Steel 18-gauge galvanized metal wall mount with 1\/8\" mounting holes.\u003c\/li\u003e\n\u003cli\u003eMount has two 1\/2\" Male NPT connections for use with beverage lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWall Mount Dimensions\u003c\/span\u003e: 11\" x 8 1\/2\"  ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045795962886,"sku":"sr-2p-mount-5-16in-60lb","price":300.19,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50297-1-v2.jpg?v=1750794548"},{"product_id":"sr-3p-mount-5-16in-60lb","title":"Taprite Secondary Wall Mounting Triple Product Regulator w\/ Beer Line Connectors (60 psi) #T1683STWMK","description":"Secondary regulators allow for more precise control of pressure, and the gauges can each be used to dispense a different keg at a different pressure.\u003cbr\u003e\u003cbr\u003eThis secondary triple product regulator from Taprite has three 60 PSI gauges, a 5\/16\" OD barbed inlet, and 5\/16\" OD barbed outlets with built in check valves.\u003cbr\u003e\u003cbr\u003eIt has a beautiful brass body construction, and has wall mounting brackets, pre-mounted on an easy to install wall mounting panel. The panel itself has three 1\/2\" Male NPT 'Y' style beer line fittings, making it great for building a well organized kegging station.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" barbed inlet designed for 5\/16\" I.D. pressure tubing.\u003c\/li\u003e\n\u003cli\u003eLeft side has a 1\/4\" NPT plug\u003c\/li\u003e\n\u003cli\u003eWorking pressure range is 0-50psi.\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e60psi Gauges\u003c\/li\u003e\n\u003cli\u003eStainless Steel 18-gauge galvanized metal wall mount with 1\/8\" mounting holes.\u003c\/li\u003e\n\u003cli\u003eMount has three 1\/2\" Male NPT connections for use with beverage lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWall Mount Dimensions\u003c\/span\u003e: 16\" x 8 1\/2\" ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045795995654,"sku":"sr-3p-mount-5-16in-60lb","price":399.29,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50298-1-v2.jpg?v=1750794547"},{"product_id":"sr-4p-mount-5-16in-60lb","title":"Taprite Secondary Wall Mounting Quad Product Regulator w\/ Beer Line Connectors (60 psi) #T1683STWMK","description":"This 4-way CO2 regulator by Taprite will allow you to control the gas flow\/pressure to each of up to 4 kegs at the same time. \u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank. A secondary regulator will allow you to regulate the pressure of each keg individually. \u003cbr\u003e\u003cbr\u003eThis particular secondary regulator comes pre-installed on a 18-gauge galvanized metal wall mount base. Attached to the wall mount are 4 integrated 1\/2\" Male NPT \"Y\" connections for attaching your beverage lines. Taking advantage of the mount helps to keep your dispensing area clear of clutter and your different beer lines organized. Doing so makes your keg and regulator setup look far more professional and cuts down on wasting time fumbling around with beer\/gas lines. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up.\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" barbed inlet designed for 5\/16\" I.D. pressure tubing.\u003c\/li\u003e\n\u003cli\u003eLeft side has a 1\/4\" NPT plug\u003c\/li\u003e\n\u003cli\u003eWorking pressure range is 0-50psi.\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e60psi Gauges\u003c\/li\u003e\n\u003cli\u003eStainless Steel 18-gauge galvanized metal wall mount with 1\/8\" mounting holes.\u003c\/li\u003e\n\u003cli\u003eMount has four 1\/2\" Male NPT connections for use with beverage lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eWall Mount Dimensions\u003c\/span\u003e: 21\" x 8 1\/2\" ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045796061190,"sku":"sr-4p-mount-5-16in-60lb","price":572.49,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50299-1-v2.jpg?v=1750794545"},{"product_id":"micro-eco-sr-1p-1g-co2-reg","title":"Micro Matic Secondary CO2 Regulator - Premium Plus Series (60 PSI) [8011-PP]","description":"High quality Micromatic 1-Way Secondary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.\u003cbr\u003e\u003cbr\u003eThis secondary CO2 regulator has a chrome plated brass body that comes equipped with a 3\/8\" OD barbed inlet.\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eThe outlets are 3\/8\" OD barbed gas shut-off valves (Right hand thread)     \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eFlow control inlet filter\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 55 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e4 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 3\/8\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e    ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645919621205,"sku":"micro-eco-sr-1p-1g-co2-reg","price":175.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22021-1-v2.jpg?v=1750794005"},{"product_id":"micro-eco-sr-4p-co2-regulator","title":"Micro Matic Secondary Quadruple CO2 Regulator (60 PSI) [8044]","description":"High quality Micromatic 4-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis secondary CO2 regulator has a brass body that comes equipped with a 3\/8\" OD barbed inlet and pass-thru outlet. The pass-thru outlet can be replaced with a 1\/4\" NPT plug (included).\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauges. All right hand (RH) threaded ports. \u003cbr\u003e\u003cbr\u003eThe bonnet is made out of Red Painted Forged Aluminum. It is approved for use with CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eThe outlets are 3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eFlow control inlet filter\u003c\/li\u003e\n\u003cli\u003eEnlarged CO2 port for high volume\u003c\/li\u003e\n\u003cli\u003eAluminum Bonnet\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003eIncludes additional 1\/4\" Male NPT Hex Plug\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e12 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 3\/8\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645919752277,"sku":"micro-eco-sr-4p-co2-regulator","price":678.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22025-1-v2.jpg?v=1750794003"},{"product_id":"micro-pre-sr-2p-co2-regulator","title":"Micro Matic Premium Plus Secondary Double CO2 Regulator (60 PSI) [1162]","description":"High quality Micromatic 2-Way Secondary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis secondary CO2 regulator has a chrome plated brass body that comes equipped with a 3\/8\" OD barbed inlet.\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports. \u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eThe outlets are \u003cspan style=\"background-color: initial;\"\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/span\u003e\u003cbr\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eFlow control inlet filter\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003eIncludes additional 1\/4\" Male NPT Hex Plug\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645920047189,"sku":"micro-pre-sr-2p-co2-regulator","price":353.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22002-1-v2.jpg?v=1750793995"},{"product_id":"micro-pre-sr-3p-co2-regulator","title":"Micro Matic Premium Secondary Triple CO2 Regulator (60 PSI) [1163]","description":"High quality Micromatic 3-Way Secondary CO2 Regulator - Premium Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis secondary CO2 regulator has a chrome plated brass body that comes equipped with a 3\/8\" OD barbed inlet.\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports. \u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eThe outlets are \u003cspan style=\"background-color: initial;\"\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eFlow control inlet filter\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003eIncludes additional 1\/4\" Male NPT Hex Plug\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645920079957,"sku":"micro-pre-sr-3p-co2-regulator","price":495.21,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22003-1-v2.jpg?v=1750793993"},{"product_id":"tap-sr-2p-3-8fl-1-4fl-ch-160lb","title":"Taprite Secondary Dual CO2 Regulator (160 PSI) [T5272SN-375]","description":"Premium Taprite 2-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 3\/8\" MFL inlet. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 1\/4\" MFL outlets (Right hand thread).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 125-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e3\/8\" MFL inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e1\/4\" MFL outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eLeft side has a 1\/4\" NPT plug\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-155 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e  ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645926207573,"sku":"tap-sr-2p-3-8fl-1-4fl-ch-160lb","price":208.44,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60257-1-v2.jpg?v=1750793764"},{"product_id":"tap-sr-3p-5-16in-ch-thru-60lb","title":"Taprite Secondary Triple Pass-Thru CO2 Regulator (60 PSI) [T1683STC-01]","description":"Premium Taprite 3-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003ePass-Thru regulators have 5\/16\" OD barbs on each side allowing you to attach tubing.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePass-Thru design allows full pass-thru through the body\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-SR-3P-5-16in-ch-thru-60lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645926240341,"sku":"tap-sr-3p-5-16in-ch-thru-60lb","price":399.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60187-1-v2.jpg?v=1750793763"},{"product_id":"tap-sr-4p-5-16in-ch-thru-60lb","title":"Taprite Secondary Quadruple Pass-Thru CO2 Regulator (60 PSI) [T1694STC-01]","description":"Premium Taprite 4-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003ePass-Thru regulators have 5\/16\" OD barbs on each side allowing you to attach tubing.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePass-Thru design allows full pass-thru through the body\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-SR-4P-5-16in-ch-thru-60lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645926273109,"sku":"tap-sr-4p-5-16in-ch-thru-60lb","price":519.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60183-1-v2.jpg?v=1750793761"},{"product_id":"taprite-sr-1p-5-16in-60lb","title":"Taprite Secondary CO2 Regulator (60 PSI) [T1661ST]","description":"Premium Taprite 1-Way Secondary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valve.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eLeft side has a 1\/4\" NPT plug\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e  \u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-SR-1P-5-16in-60lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-SR-1P-5-16in-60lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645928403029,"sku":"taprite-sr-1p-5-16in-60lb","price":114.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60269-1-v2.jpg?v=1750793698"},{"product_id":"taprite-sr-2p-5-16in-thru-60lb","title":"Taprite Secondary Pass-Thru Dual CO2 Regulator (60 PSI) [T1672ST-2N]","description":"Premium Taprite 2-Way Secondary Pass-Thru CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with 5\/16\" OD nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Right hand (RH) threaded ports.  The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003ePass-Thru regulators have 5\/16\" OD barbs on each side allowing you to attach tubing.\u003cbr\u003e\u003cbr\u003eSecondary regulators are used when you are attempting to dispense two or more kegs off of the same CO2 tank.\u003cbr\u003e\u003cbr\u003eA secondary regulator will allow you to regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eFeatures 5\/16\" OD barbed shut-off valves.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eTaprite secondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2\u003c\/li\u003e\n\u003cli\u003ePass-Thru design allows full pass-thru through the body\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-SR-2P-5-16in-thru-60lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-SR-2P-5-16in-thru-60lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645928435797,"sku":"taprite-sr-2p-5-16in-thru-60lb","price":226.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60197-1-v2.jpg?v=1750793696"},{"product_id":"micro-pp-sr-1p-1g-lp-co2-reg","title":"Micro Matic Secondary CO2 Regulator - Premium Plus Series (15 PSI) [8011-15-PP]","description":"High quality Micromatic 1-Way Secondary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.\u003cbr\u003e\u003cbr\u003eThis secondary CO2 regulator has a chrome plated brass body that comes equipped with a 3\/8\" OD barbed inlet.\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level. Attaching a secondary regulator to your dispensing setup allows you to easily regulate the pressure of each keg individually.\u003cbr\u003e\u003cbr\u003eThe outlets are 3\/8\" OD barbed gas shut-off valves (Right hand thread) \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eSecondary regulators are designed to further reduce pressure from a primary regulator to a proper dispensing level.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eFlow control inlet filter\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT (Right hand thread)\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 55 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eComes with wall mounting brackets\u003c\/li\u003e\n\u003cli\u003eIncludes additional 1\/4\" Male NPT Hex Plug\u003c\/li\u003e\n\u003cli\u003e0-15 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e4 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39598565458005,"sku":"micro-pp-sr-1p-1g-lp-co2-reg","price":178.49,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/61409-1-v2.jpg?v=1750791771"}],"url":"https:\/\/www.canuckhomebrewsupply.com\/collections\/secondary-regulators.oembed","provider":" Canuck Homebrew Supply, Canada","version":"1.0","type":"link"}