{"title":"Nitrogen Regulators","description":"","products":[{"product_id":"taprite-dual-gauge-zinc","title":"Taprite Dual Gauge Regulator - 60 PSI \u0026 2000 PSI Gauges #742HP-02","description":"Premium Taprite Dual Product Dual Pressure Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2, argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003e\u003cspan style='color: rgb(52, 52, 52); font-family: \"Open Sans\", sans-serif; font-size: 14px;'\u003eFeatures an MFL threaded output connection (does \u003c\/span\u003e\u003cb style='box-sizing: border-box; color: rgb(52, 52, 52); font-family: \"Open Sans\", sans-serif; font-size: 14px;'\u003eNOT\u003c\/b\u003e\u003cspan style='color: rgb(52, 52, 52); font-family: \"Open Sans\", sans-serif; font-size: 14px;'\u003e include a Stainless Steel Barbed Swivel Nut).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2, Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003eFits 1\/4\" I.D. pressure hose. Inlet designed for 1\/4\" I.D. pressure tubing.\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pres\u003cspan id=\"selection-marker-1\" class=\"redactor-selection-marker\"\u003esure Range 0-50 PSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-dual-gauge-zinc-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43594284422,"sku":"taprite-dual-gauge-zinc","price":158.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/21800-1-v2.jpg?v=1750796935"},{"product_id":"taprite-nitro-primary","title":"Taprite High Pressure Nitrogen Regulator #5741PMHPN","description":"Premium Taprite High Pressure Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-nitro-primary-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-nitro-primary-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597759302,"sku":"taprite-nitro-primary","price":183.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/32020-1-v2.jpg?v=1750795723"},{"product_id":"taprite-dual-gauge-duck-bill","title":"Taprite Primary Nitrogen Regulator (60 \u0026 3000PSI) #742HPN","description":"Premium Taprite Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures an \u003cspan style=\"background-color: initial;\"\u003e\u003ci\u003e\u003cb\u003e5\/16\" Barbed Duckbill shut off valve outlet\u003c\/b\u003e\u003c\/i\u003e (Right hand thread).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" Barbed Duckbill shut off valve outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-dual-gauge-duck-bill-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-dual-gauge-duck-bill-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":45854374854,"sku":"taprite-dual-gauge-duck-bill","price":185.01,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/32021-1-v2.jpg?v=1750795401"},{"product_id":"taprite-dual-product","title":"Taprite Dual Product Regulator (60 \u0026 2000PSI) #752HP-02","description":"Premium Taprite Dual Product Dual Pressure Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2, argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eThis Dual Body Regulator is the perfect choice for those who want to keep different pressures on different beer styles. Also used for serving and carbonating simultaneously off the same CO2 tank.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection ( Does \u003cb\u003eNOT\u003c\/b\u003e include Barbed Swivel Nuts).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2, Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003eFits 1\/4\" I.D. pressure hose. Inlet designed for 1\/4\" I.D. pressure tubing.\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pres\u003cspan id=\"selection-marker-1\" class=\"redactor-selection-marker\"\u003esure Range 0-50 PSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-dual-product-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":45905644678,"sku":"taprite-dual-product","price":256.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/21532-1-v2.jpg?v=1750795399"},{"product_id":"pr-1p-1-4fl-5-16in-160-3000lb","title":"Taprite Primary Nitrogen Regulator (160 \u0026 3000 psi) #5741WMHPNT-6","description":"Premium Taprite Primary Nitrogen Regulator with HP Hose. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with 1\/4\" Flared Inlet.\u003cbr\u003e\u003cbr\u003eThe inlet is a 1\/4\" MFL fitting, and comes with a six foot high pressure hose assembly which connects the MFL to the Nitrogen tanks CGA580 fitting. On the outlet side it has a 1\/4\" MFL connection allowing the attachment of 1\/4\" flared hardware. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures an \u003cspan style=\"background-color: initial;\"\u003e5\/16\" OD barb shut off valve with check (Right hand thread).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003e1\/4\" Flared Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003e6' HP Hose that attaches to CGA580 outlets\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barb shut off valve with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eMounting bracket on each unit\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045795438598,"sku":"pr-1p-1-4fl-5-16in-160-3000lb","price":252.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50281-1-v2.jpg?v=1750794569"},{"product_id":"pr-1p-5-16in-60-3000lb","title":"Taprite Primary Nitrogen Regulator (60 \u0026 3000 psi) #742N","description":"Premium Taprite Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures an \u003cspan style=\"background-color: initial;\"\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003e5\/16\" Barbed valve outlet\u003c\/span\u003e\u003c\/i\u003e (Right hand thread).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" Barbed valve outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eTaprite Documentation:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/PR-1P-5-16in-60-3000lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e  ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045795536902,"sku":"pr-1p-5-16in-60-3000lb","price":189.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50282-1-v2.jpg?v=1750794566"},{"product_id":"micro-pre-pr-1p-hp-co2-reg","title":"Micro Matic Premium Plus Primary High Pressure CO2 Regulator (160 \u0026 3000 PSI) [942B-PP]","description":"High quality Micromatic 1-Way Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 115 to 125 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003e'High Pressure' regulators are equipped with a 0-120 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cspan style=\"color: rgb(241,0,12);\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 115-125 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-120 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e6 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cspan style=\"color: rgb(241, 0, 12); font-weight: bold;\"\u003eWarning from Micro Matic:\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645919916117,"sku":"micro-pre-pr-1p-hp-co2-reg","price":217.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22018-1-v2.jpg?v=1750793998"},{"product_id":"pr-1p-1-4fl-1-4fl-160-3000lb","title":"Taprite Primary High Pressure Nitrogen Regulator w\/ High Pressure Hose (160 \u0026 3000 PSI) [5741WMHPN-06]","description":"Premium Taprite Primary Nitrogen Regulator with HP Hose. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with 1\/4\" Flared Inlet.\u003cbr\u003e\u003cbr\u003eThe inlet is a 1\/4\" MFL fitting, and comes with a six foot high pressure hose assembly which connects the MFL to the Nitrogen tanks CGA580 fitting. On the outlet side it has a 1\/4\" MFL connection allowing the attachment of 1\/4\" flared hardware. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003e1\/4\" Flared Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003e6' HP Hose that attaches to CGA580 outlets\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eMounting bracket on each unit\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645921456213,"sku":"pr-1p-1-4fl-1-4fl-160-3000lb","price":252.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60174-1-v2.jpg?v=1750793906"},{"product_id":"tap-pr-1p-n2-check-160-3000lb","title":"Taprite Primary High Pressure Nitrogen Regulator (160 \u0026 3000 PSI) [5741PMHPNT]","description":"Premium Taprite High Pressure Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures a 5\/16\" barbed shut-off valve with check. (Right Hand Threaded).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-1P-N2-check-160-3000lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-1P-N2-check-160-3000lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925814357,"sku":"tap-pr-1p-n2-check-160-3000lb","price":213.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60259-1-v2.jpg?v=1750793789"},{"product_id":"tap-pr-1p-n2-duck-b-30-3000lb","title":"Taprite Primary Low Pressure Nitrogen Regulator (30 \u0026 3000 PSI) [742HPN-30]","description":"Premium Taprite Low Pressure Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures an \u003cspan style=\"background-color: initial;\"\u003e\u003ci\u003e\u003cb\u003e5\/16\" Barbed Duckbill shut off valve outlet\u003c\/b\u003e\u003c\/i\u003e (Right hand thread).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, Argon and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" Barbed Duckbill shut off valve outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-30 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925847125,"sku":"tap-pr-1p-n2-duck-b-30-3000lb","price":193.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60260-1-v2.jpg?v=1750793787"},{"product_id":"tap-pr-2p-n2-ch-60-160-3000lb","title":"Taprite Primary Dual High Pressure Nitrogen Regulator (60, 160, \u0026 3000 PSI) [5752HPN-03]","description":"Premium Taprite Primary Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 125 to 130 PSI.)  Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 inlet. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures dual 5\/16\" barbed valves with check.\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 125-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, and Argon, and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" barbed valves with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925912661,"sku":"tap-pr-2p-n2-ch-60-160-3000lb","price":319.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60192-1-v2.jpg?v=1750793784"},{"product_id":"taprite-752n-03-regulator","title":"Taprite Primary Dual Nitrogen Regulator (60 \u0026 3000 PSI) [752N-03]","description":"Premium Taprite Primary Nitrogen Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.)  Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 580 inlet. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for argon, nitrogen, beer gas, and beer gas blends.\u003cbr\u003e\u003cbr\u003eFeatures dual 1\/4\" MFL threaded output connections (does NOT include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Nitrogen, and Argon, and blended Beer gas.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlets with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pres\u003cspan id=\"selection-marker-1\" class=\"redactor-selection-marker\"\u003esure Range 0-50 PSI\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-752N-03-regulator-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645926797397,"sku":"taprite-752n-03-regulator","price":287.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/40368-1-v2.jpg?v=1750793739"},{"product_id":"micro-pre-pr-1p-hp-n2-reg","title":"Micro Matic 1-Way Primary High Pressure Nitrogen Regulator (120 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary High Pressure Nitrogen Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 115 to 125 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis 'High Pressure' regulator is equipped with a 0-120 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread) \u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: rgb(241,0,12);\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 115-125 PSIG.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2 and Nitrogen.\u003c\/li\u003e \t\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e \t\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e \t\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e \t\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0 - 120 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-120 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e \t\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e \u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39279059927125,"sku":"micro-pre-pr-1p-hp-n2-reg","price":217.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60798-1-v2.jpg?v=1750792031"},{"product_id":"micro-pre-pr-1p-lp-n2-reg","title":"Micro Matic 1-Way Primary Nitrogen Regulator (60 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary Low Pressure Nitrogen Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis regulator is equipped with a standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread) \u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: rgb(241, 0, 12); font-weight: bold;\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003c\/span\u003e        \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2 and Nitrogen.\u003c\/li\u003e \t\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e \t\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e \t\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e \t\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0 - 60 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e \t\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e \u003c\/ul\u003e        ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39280607101013,"sku":"micro-pre-pr-1p-lp-n2-reg","price":214.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60797-1-v2.jpg?v=1750792028"},{"product_id":"micro-matic-1-way-primary-low-pressure-nitrogen-regulator-15-psi-3000-psi-premium-plus-series","title":"Micro Matic 1-Way Primary Low Pressure Nitrogen Regulator (15 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary Low Pressure Nitrogen Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis 'Low Pressure' regulator is equipped with a 0-15 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread) \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(241, 0, 12); font-weight: bold;\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003c\/span\u003e   \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2 and Nitrogen.\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 15 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-15 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e   ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39483618787413,"sku":"micro-pp-pr-1p-n2-15-3000lb","price":223.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/61411-1-v2.jpg?v=1750791899"}],"url":"https:\/\/www.canuckhomebrewsupply.com\/collections\/nitrogen-regulators.oembed","provider":" Canuck Homebrew Supply, Canada","version":"1.0","type":"link"}