{"title":"Primary CO2 Regulators","description":"","products":[{"product_id":"taprite-t5741pmhpbk","title":"Taprite High Pressure Primary Regulator (160 \u0026 2000PSI) #T5741PMHPBK","description":"Premium Taprite Primary Soda Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Set the screw adjustment and forget it to maintain a constant pressure to your dispensing system. Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from poycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-134 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eBlack Cap\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120PSI\u003c\/li\u003e\n\u003cli\u003eNon-removable adjusting screw limits maximum delivery pressure to 50 PSIG\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-T5741PMHPBK-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/taprite-T5741PMHPBK-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597927238,"sku":"taprite-t5741pmhpbk","price":158.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/29009-1-v2.jpg?v=1750795627"},{"product_id":"taprite-t5741pmhpt","title":"Taprite Dual Gauge Primary Beer \u0026 Soda CO2 Regulator (160 \u0026 2000PSI) #T5741PMHPT","description":"Premium Taprite Primary High Pressure Beer and Soda CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Set the screw adjustment and forget it to maintain a constant pressure to your dispensing system. Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut.\u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an 5\u003cspan style=\"background-color: initial;\"\u003e\/16\" OD barbed shut-off valve with check. (Right hand thread)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve with check. (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-T5741PMHPT-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597927302,"sku":"taprite-t5741pmhpt","price":152.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/29010-1-v2.jpg?v=1750795624"},{"product_id":"taprite-t5752hp-05","title":"Taprite Dual Product Beer and Soda CO2 Regulator (60, 160, \u0026 2000PSI) #T5752HP-05","description":"Premium Taprite Primary Beer and Soda Dual Product CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 and 126 to 130 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures a 5\/16\" OD barb shutoff valve and 1\/4\" OD barb shutoff valve with check (Right hand thread).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG and 126-134 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barb shutoff valve and 1\/4\" OD barb shutoff valve with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-T5752HP-05-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597930054,"sku":"taprite-t5752hp-05","price":279.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/29589-1-v2.jpg?v=1750795621"},{"product_id":"taprite-t742-2","title":"Taprite Primary Dual Outlet CO2 Regulator (60 \u0026 2000PSI) #T742-2","description":"Premium Taprite 1P2P Dual Gauge CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures dual \u003cspan style=\"background-color: initial;\"\u003e5\/16\" OD barbed outlets with check. (Right hand thread).\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed outlets with check. (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e8 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-t742-2-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597930950,"sku":"taprite-t742-2","price":219.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/29012-1-v2.jpg?v=1750795619"},{"product_id":"taprite-t742hp-02","title":"Taprite Primary CO2 Regulator (60 \u0026 2000PSI) #T742HP-02","description":"Premium Taprite Primary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection (does \u003cspan style=\"font-weight: bold;\"\u003eNOT\u003c\/span\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eThe plastic bonnet on this model is prone to striping. We recommend a zinc model if change your pressure often.\u003c\/span\u003e\u003c\/i\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003chr\u003e \u003cspan style=\"font-weight: bold;\"\u003eTaprite Documentation:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-t742HP-02-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e    ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597931078,"sku":"taprite-t742hp-02","price":159.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/29011-1-v2.jpg?v=1750795617"},{"product_id":"taprite-t752hp-02","title":"Taprite Dual Product Primary Regulator (60 \u0026 2000PSI) #T752HP-02","description":"Premium Taprite Primary Dual Product CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures MFL threaded valve output connections (does \u003cspan style=\"font-weight: bold;\"\u003eNOT\u003c\/span\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared valve outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eTaprite Documentation:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-T752HP-02-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":43597931142,"sku":"taprite-t752hp-02","price":267.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/28977-1-v2.jpg?v=1750795616"},{"product_id":"pr-1p-5-16in-60lb","title":"Taprite Single Gauge Primary CO2 Regulator (60 psi) #T741","description":"Premium Taprite Primary Single Gauge CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003eThis particular regulator only has a single 60 PSI gauge.\u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an 5\/16\" OD barbed shut-off valve with check (Right hand thread).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eLeft side has a 1\/4\" NPT plug\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e5\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e  \u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/PR-1P-5-16in-60lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":1045795569670,"sku":"pr-1p-5-16in-60lb","price":153.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/50280-1-v2.jpg?v=1750794565"},{"product_id":"taprite-t5752hp-02","title":"Taprite Dual Product Regulator (160 \u0026 2000PSI) - T5752HP-02","description":"Premium Taprite Primary Dual Product CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures MFL threaded output connections (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlets (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-155 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/taprite-T5752HP-02-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12480018939989,"sku":"taprite-t5752hp-02","price":279.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/40112-1-v2.jpg?v=1750794143"},{"product_id":"micro-eco-pr-2p-co2-regulator","title":"Micro Matic Premium Plus Primary Dual Outlet CO2 Regulator (60 \u0026 3000 PSI) [842-2-PP]","description":"High quality Micromatic 2-Way Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a \u003cspan style=\"background-color: initial;\"\u003esintered bronze mesh inlet filter. \u003c\/span\u003eIt is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlets are \u003cspan style=\"background-color: initial;\"\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/span\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7\" Wide\u003c\/li\u003e\n\u003cli\u003e8 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e   ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645919588437,"sku":"micro-eco-pr-2p-co2-regulator","price":244.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22029-1-v2.jpg?v=1750794007"},{"product_id":"micro-pre-pr-1p-co2-regulator","title":"Micro Matic Premium Plus Primary CO2 Regulator (60 \u0026 3000 PSI) [842-PP]","description":"High quality Micromatic 1-Way Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a s\u003cspan style=\"background-color: initial;\"\u003eintered bronze mesh inlet filter. \u003c\/span\u003eIt is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a \u003cspan style=\"background-color: initial;\"\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/span\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e             ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645919883349,"sku":"micro-pre-pr-1p-co2-regulator","price":198.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22016-1-v2.jpg?v=1750793999"},{"product_id":"micro-pre-pr-1p-hp-co2-reg","title":"Micro Matic Premium Plus Primary High Pressure CO2 Regulator (160 \u0026 3000 PSI) [942B-PP]","description":"High quality Micromatic 1-Way Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 115 to 125 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003e'High Pressure' regulators are equipped with a 0-120 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cspan style=\"color: rgb(241,0,12);\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 115-125 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-120 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e6 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cspan style=\"color: rgb(241, 0, 12); font-weight: bold;\"\u003eWarning from Micro Matic:\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px;\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e \u003c\/span\u003e\u003c\/span\u003e ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":12645919916117,"sku":"micro-pre-pr-1p-hp-co2-reg","price":217.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/22018-1-v2.jpg?v=1750793998"},{"product_id":"pr-1p-5-16in-60-2000lb","title":"Taprite Primary CO2 Regulator w\/ Poly Bonnet (60 \u0026 2000 PSI) [T742HP]","description":"Premium Taprite Primary CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from Polycorbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an 5\/16\" barbed shut-off valve with check (Right Hand Threaded).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e5\/16\" OD barbed shut-off valve with check (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/PR-1P-5-16in-60-2000lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\n\u003c\/li\u003e\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645921488981,"sku":"pr-1p-5-16in-60-2000lb","price":172.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60266-1-v2.jpg?v=1750793902"},{"product_id":"pr-2p-ffl-ch-100-160-2000lb-h","title":"Taprite Double Primary High Pressure CO2 Regulator (100, 160, \u0026 2000 PSI) [T8871-6]","description":"Premium Taprite Dual Primary CO2 Regulator with HP Hose. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with 1\/4\" Flared Inlet.\u003cbr\u003e\u003cbr\u003eThe inlet is a 1\/4\" MFL fitting, and comes with a six foot high pressure hose assembly which connects the MFL to the CO2 tanks CGA320 fitting. On the outlet side it has a 1\/4\" MFL connection allowing the attachment of 1\/4\" flared hardware. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e1\/4\" Flared Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003e6' HP Hose that attaches to CGA320 outlets\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eMounting bracket on each unit\u003c\/li\u003e\n\u003cli\u003e0-100 PSI high pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645921521749,"sku":"pr-2p-ffl-ch-100-160-2000lb-h","price":339.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60185-1-v2.jpg?v=1750793899"},{"product_id":"tap-pr-1p-1-4ffl-160-2000lb","title":"Taprite Primary High Pressure Soda Regulator (160 \u0026 2000 PSI) [T5741PMHP]","description":"Premium Taprite Primary Soda Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Set the screw adjustment and forget it to maintain a constant pressure to your dispensing system. Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from polycarbonate. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-134 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003eRed Cap\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120PSI\u003c\/li\u003e\n\u003cli\u003eNon-removable adjusting screw limits maximum delivery pressure to 50 PSIG\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-1P-1-4ffl-160-2000lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-1P-1-4ffl-160-2000lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925748821,"sku":"tap-pr-1p-1-4ffl-160-2000lb","price":166.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60267-1-v2.jpg?v=1750793792"},{"product_id":"tap-pr-1p-1-4ffl-ch-160-2000lb","title":"Taprite Primary High Pressure CO2 Regulator (160 \u0026 2000 PSI) [3741]","description":"Premium Taprite High Pressure CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-1P-1-4ffl-ch-160-2000lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-1P-1-4ffl-ch-160-2000lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925781589,"sku":"tap-pr-1p-1-4ffl-ch-160-2000lb","price":140.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60270-1-v2.jpg?v=1750793790"},{"product_id":"tap-pr-2p-1-4ffl-160-2000lb","title":"Taprite Primary Dual High Pressure CO2 Regulator (160 \u0026 2000 PSI) [3752]","description":"Premium Taprite High Pressure CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e\n\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycorbonate (plastic)\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field.\u003c\/li\u003e\n\u003cli\u003e0-160 PSI high pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e10 1\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-2P-1-4ffl-160-2000lb-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-2P-1-4ffl-160-2000lb-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925879893,"sku":"tap-pr-2p-1-4ffl-160-2000lb","price":266.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60199-1-v2.jpg?v=1750793786"},{"product_id":"tap-pr-ffl-ch-160-2000lb-hose","title":"Taprite Primary High Pressure CO2 Regulator w\/ HP Hose (160 \u0026 2000 PSI) [T5741WMHP-6]","description":"Premium Taprite Primary CO2 Regulator with HP Hose. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with 1\/4\" Flared Inlet.\u003cbr\u003e\u003cbr\u003eThe inlet is a 1\/4\" MFL fitting, and comes with a six foot high pressure hose assembly which connects the MFL to the CO2 tanks CGA320 fitting. On the outlet side it has a 1\/4\" MFL connection allowing the attachment of 1\/4\" flared hardware. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e1\/4\" Flared Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003e6' HP Hose that attaches to CGA320 outlets\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eMounting bracket on each unit\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-ffl-ch-160-2000lb-hose-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-ffl-ch-160-2000lb-hose-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925945429,"sku":"tap-pr-ffl-ch-160-2000lb-hose","price":251.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60195-1-v2.jpg?v=1750793781"},{"product_id":"tap-pr-ffl-ch-160-2000lb-wall","title":"Taprite Primary High Pressure CO2 Regulator (160 \u0026 2000 PSI) [T5741WMHP]","description":"Premium Taprite Primary High Pressure CO2 Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 126 to 130 PSI.) Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with 1\/4\" Flared Inlet.\u003cbr\u003e\u003cbr\u003eThe inlet is a 1\/4\" MFL fitting. On the outlet side it has a 1\/4\" MFL connection allowing the attachment of 1\/4\" flared hardware. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2.\u003cbr\u003e\u003cbr\u003eFeatures an MFL threaded output connection. (does \u003cb\u003eNOT\u003c\/b\u003e include a Stainless Steel Barbed Swivel Nut).\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cb\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/b\u003e\u003c\/i\u003e\u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 126-130 PSIG.\u003c\/li\u003e\n\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle CO2.\u003c\/li\u003e\n\u003cli\u003ePolycorbonate Bonnet\u003c\/li\u003e\n\u003cli\u003e1\/4\" Flared Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" male flared outlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0-120 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003eMounting bracket on each unit\u003c\/li\u003e\n\u003cli\u003e0-160 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cb\u003eDimensions:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 5\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003chr\u003e\u003cb\u003eTaprite Documentation:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e \u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-ffl-ch-160-2000lb-wall-SPEC.pdf\" target=\"_blank\"\u003eSPECIFICATIONS\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/assets\/pdf\/Taprite\/tap-PR-ffl-ch-160-2000lb-wall-EXP.pdf\" target=\"_blank\"\u003eEXPANDED PARTS BREAKDOWN\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Taprite","offers":[{"title":"Default Title","offer_id":12645925978197,"sku":"tap-pr-ffl-ch-160-2000lb-wall","price":181.29,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60265-1-v2.jpg?v=1750793778"},{"product_id":"micro-pre-pr-dual-co2-reg-bat","title":"Micro Matic Premium Plus Series 2-Way Dual Primary Co2 Regulator - 60 PSI \u0026 3000 PSI [842-Battery-PP]","description":"High quality Micromatic 2-Way Dual Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a s\u003cspan style=\"background-color: initial;\"\u003eintered bronze mesh inlet filter. \u003c\/span\u003eIt is approved for use with CO2. \u003cbr\u003e\u003cbr\u003eDual Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed. The dual nature of this regulator allows you to directly adjust the pressure for each of the two products.\u003cbr\u003e\u003cbr\u003eThe outlets are \u003cspan style=\"background-color: initial;\"\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread).\u003c\/span\u003e\u003cbr\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valves (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e12\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":32444078325845,"sku":"micro-pre-pr-dual-co2-reg-bat","price":367.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60490-1-v2.jpg?v=1750793207"},{"product_id":"mk4-dual-product-gas-regulator","title":"Kegland Multi-Gas 2-Way Dual Primary Co2 Regulator - 100 PSI \u0026 3000 PSI - 5\/16\" (8mm) - MK4","description":"\u003cspan style=\"font-weight: bold;\"\u003eProduct Code: KL10870\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThis economy primary dual product Co2 regulator has a chrome plated brass body that comes equipped with a standard co2 CGA320 inlet.\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system that can be manually released using the integrated PRV. Rubberized protection on the gauges protects them from harm.\u003cbr\u003e\u003cbr\u003eDual Primary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed. The dual nature of this regulator allows you to directly adjust the pressure for each of the two products.\u003cbr\u003e\u003cbr\u003eThe outlets are 1\/4\" MFL connections (right hand thread) that have Duotight Food Grade Plastic (Push-In) Fittings - 1\/4\" FFL X 5\/16\" (8mm).\u003cbr\u003e\u003cbr\u003eDuotight fittings are designed to work by simply pushing in the compatible tubing. \u003cbr\u003e\u003cbr\u003eInside each fitting are dual EPDM o-rings that provide superior sealing capacity due to having twice the sealing surface area when compared to other push in fittings. This makes Duotight fittings even more reliable and significantly reduces the chance of a leak.\u003cbr\u003e\u003cbr\u003eFor optimal performance it is recommended that when cutting your tubing it is cut straight, not on an angle, this helps to ensure a complete seal.\u003cbr\u003e\u003cbr\u003eMeant to be used with 5\/16\" OD (8mm) Polyethylene Tubing.  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in pressure relief valve that can be manually released\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Chrome Plated Finish. Can handle Co2 and Mixed Gasses\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" MFL Connections (right hand thread)\u003c\/li\u003e\n\u003cli\u003eDuotight Food Grade Plastic (Push-In) Fittings - 1\/4\" FFL X 5\/16\" (8mm) x 2\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 20 PSI\u003c\/li\u003e\n\u003cli\u003eEasy grip knob for easy adjustments\u003c\/li\u003e\n\u003cli\u003eRubberized gauges for extra protection\u003c\/li\u003e\n\u003cli\u003e0-100 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e11 3\/8\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e             ","brand":"Kegland","offers":[{"title":"Default Title","offer_id":32544719929429,"sku":"mk4-dual-product-gas-regulator","price":149.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60762-1-v2.jpg?v=1750792945"},{"product_id":"micro-pre-pr-co2-add-on","title":"Micro Matic Primary Add-On Co2 Regulator (60 PSI) - Premium Plus Series","description":"High quality Micromatic Primary Add-On CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 add-on regulator has a chrome plated brass body that comes equipped with a CGA320 inlet and a CGA320 connection. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). Can be manually released using the integrated PRV. High quality and highly accurate gauges.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary add-on regulators are designed to convert your existing Micro Matic primary CO2 regulator into a dual product primary model. The add-on module style design makes expansion quick and easy.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread)  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG. Can be manually released using the integrated PRV.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e \t\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e \t\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e \t\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e \t\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eCGA320 Add-On Connection (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0 - 50 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e5 1\/2\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e \u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39278980825173,"sku":"micro-pre-pr-co2-add-on","price":188.97,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60795-1-v2.jpg?v=1750792034"},{"product_id":"micro-pre-pr-1p-hp-n2-reg","title":"Micro Matic 1-Way Primary High Pressure Nitrogen Regulator (120 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary High Pressure Nitrogen Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 115 to 125 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis 'High Pressure' regulator is equipped with a 0-120 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread) \u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: rgb(241,0,12);\"\u003e\u003cspan style=\"font-weight: bold;\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 115-125 PSIG.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2 and Nitrogen.\u003c\/li\u003e \t\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e \t\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e \t\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e \t\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0 - 120 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-120 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e \t\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e \u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39279059927125,"sku":"micro-pre-pr-1p-hp-n2-reg","price":217.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60798-1-v2.jpg?v=1750792031"},{"product_id":"micro-pre-pr-1p-lp-n2-reg","title":"Micro Matic 1-Way Primary Nitrogen Regulator (60 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary Low Pressure Nitrogen Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis regulator is equipped with a standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread) \u003cbr\u003e\u003cbr\u003e \u003cspan style=\"color: rgb(241, 0, 12); font-weight: bold;\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003c\/span\u003e        \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2 and Nitrogen.\u003c\/li\u003e \t\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e \t\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e \t\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e \t\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0 - 60 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e \t\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e \u003c\/ul\u003e        ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39280607101013,"sku":"micro-pre-pr-1p-lp-n2-reg","price":214.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60797-1-v2.jpg?v=1750792028"},{"product_id":"micro-pre-pr-1p-lp-co2-reg","title":"Micro Matic 1-Way Primary Low Pressure Co2 Regulator (15 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis 'Low Pressure' regulator is equipped with a 0-15 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a s\u003cspan style=\"background-color: initial;\"\u003eintered bronze mesh inlet filter. \u003c\/span\u003eIt is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a \u003cspan style=\"background-color: initial;\"\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/span\u003e  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e \t\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e \t\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e \t\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e \t\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0 - 15 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-15 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e \t\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e \u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39280614867029,"sku":"micro-pre-pr-1p-lp-co2-reg","price":252.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60796-1-v2.jpg?v=1750792024"},{"product_id":"micro-matic-1-way-primary-1-gauge-co2-regulator-60-psi-premium-plus-series","title":"Micro Matic 1-Way Primary 1-Gauge Co2 Regulator (60 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary 1-Gauge CO2 Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA.\u003cbr\u003e\u003cbr\u003eThis primary CO2 regulator has a chrome plated brass body that comes equipped with a CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. It is approved for use with CO2. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valves (Right hand thread)  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2\u003c\/li\u003e\n\u003cli\u003eFlow control inlet filter\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed inlet (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 55 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-60 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e4 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 3\/8\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e  ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39483615969365,"sku":"micro-pp-pr-1p-1g-co2-reg","price":149.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/61408-1-v2.jpg?v=1750791902"},{"product_id":"micro-matic-1-way-primary-low-pressure-nitrogen-regulator-15-psi-3000-psi-premium-plus-series","title":"Micro Matic 1-Way Primary Low Pressure Nitrogen Regulator (15 PSI, 3000 PSI) - Premium Plus Series","description":"High quality Micromatic 1-Way Primary Low Pressure Nitrogen Regulator. Premium Plus Series. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eThis primary Nitrogen regulator has a chrome plated brass body that comes equipped with a CGA580 inlet. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system (blow off at 55 to 65 PSI). High quality and highly accurate gauge. All right hand (RH) threaded ports.\u003cbr\u003e\u003cbr\u003eThis 'Low Pressure' regulator is equipped with a 0-15 PSI gauge opposed to the standard 0-60 PSI gauge traditionally found on a regulator.\u003cbr\u003e\u003cbr\u003eThe valve seat is made out of nickel plated brass for higher corrosion resistance. As well as a sintered bronze mesh inlet filter. It is approved for use with CO2 and Nitrogen. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your Nitrogen tank providing a way to reduce the high pressure of gas being dispensed.\u003cbr\u003e\u003cbr\u003eThe outlet is a 3\/8\" OD barbed gas shut-off valve (Right hand thread) \u003cbr\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(241, 0, 12); font-weight: bold;\"\u003eWarning from Micro Matic:\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: rgb(0, 0, 0); font-family: Roboto, sans-serif;\"\u003e\u003cspan style=\"font-size: 18px; font-weight: bold;\"\u003eOnly use in a gas blender or nitrogen generator application!\u003c\/span\u003e\u003c\/span\u003e   \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-65 PSIG.\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Chrome Plated Finish. Can handle Co2 and Nitrogen.\u003c\/li\u003e\n\u003cli\u003eNickel plated valve seat for higher corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSintered bronze mesh inlet filter\u003c\/li\u003e\n\u003cli\u003eBuilt in CO2 resistant solid nylon inlet seal\u003c\/li\u003e\n\u003cli\u003eCGA580 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e3\/8\" OD barbed gas shut-off valve (Right hand thread)\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 15 PSI\u003c\/li\u003e\n\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e\n\u003cli\u003e0-15 PSI low pressure gauge (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-3000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7 1\/4\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e   ","brand":"Micromatic","offers":[{"title":"Default Title","offer_id":39483618787413,"sku":"micro-pp-pr-1p-n2-15-3000lb","price":223.51,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/61411-1-v2.jpg?v=1750791899"},{"product_id":"duo-6-35-inline-reg-0-150psi","title":"Kegland Duotight Inline Regulator With Gauge - 1\/4\" (6.35mm) (0-150 PSI)","description":"\u003cspan style=\"font-weight: bold;\"\u003eProduct Code: KL26918\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThis Duotight Inline Regulator with Gauge is suitable for gas or liquid. It is constructed out of non corrosive acetyl, nitrile, and stainless components. At the base of the regulator are two mounting points allowing it to be securely attached to wherever you desire. \u003cbr\u003e\u003cbr\u003eIt features an integrated fully interchangeable gauge that displays pressure between 0 - 150 PSI. You can use it to lower the CO2 pressure going into a keg, or use it to reduce the main water pressure to anywhere between 0-150 PSI.\u003cbr\u003e\u003cbr\u003eThe intended use for this regulator is to allow for the serving of different beers at different gas pressures. Traditionally this is done by utilizing a Primary and Secondary regulator where you would set different pressures. This compact device is a far cheaper solution that still allows you to set different pressures for your various different beers.\u003cbr\u003e\u003cbr\u003eThis is done by setting the Primary regulator to the highest pressure desired for your system. From there you run the gas line into a manifold, then install one of these inline regulators after each manifold where you want to decrease pressure. Once installed you can manually adjust the flow with the adjustment knob.\u003cbr\u003e\u003cbr\u003eDuotight fittings are designed to work by simply pushing in the compatible tubing. \u003cbr\u003e\u003cbr\u003eInside each fitting are dual EPDM o-rings that provide superior sealing capacity due to having twice the sealing surface area when compared to other push in fittings. This makes Duotight fittings even more reliable and significantly reduces the chance of a leak.\u003cbr\u003e\u003cbr\u003eFor optimal performance it is recommended that when cutting your tubing it is cut straight, not on an angle, this helps to ensure a complete seal.\u003cbr\u003e\u003cbr\u003eMeant to be used with 1\/4\" OD (6.35mm) Polyethylene Tubing.    \u003cbr\u003e\u003cbr\u003e \u003cb\u003ePlease Note: This product is NOT to be cleaned with chemicals\u003c\/b\u003e \u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eNon corrosive acetyl, nitrile, and stainless components\u003c\/li\u003e\n\u003cli\u003eDuotight (Push In) Connections\u003c\/li\u003e\n\u003cli\u003eSuitable for mains water pressure\u003c\/li\u003e\n\u003cli\u003eSuitable for liquid or gas\u003c\/li\u003e\n\u003cli\u003eCan withstand 0-150 PSI\u003c\/li\u003e\n\u003cli\u003e2 Mounting points\u003c\/li\u003e\n\u003cli\u003eIntegrated interchangeable 0-150 PSI pressure gauge\u003c\/li\u003e\n\u003cli\u003eDesigned for use with 1\/4\" OD (6.35mm) Polyethylene Tubing\u003c\/li\u003e\n\u003c\/ul\u003e   ","brand":"Duotight","offers":[{"title":"Default Title","offer_id":40684678938709,"sku":"duo-6-35-inline-reg-0-150psi","price":30.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60721-1-v2.jpg?v=1750791541"},{"product_id":"mk4-dual-gauge-multi-gas-reg","title":"Kegland Multi-Gas 1-Way Primary Co2 Regulator (100 PSI, 4500 PSI) - 5\/16\" (8mm) [MK4]","description":"\u003cspan style=\"font-weight: bold;\"\u003eProduct Code: KL07450\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThis economy primary Co2 regulator has a chrome plated brass body that comes equipped with a standard Co2 CGA320 inlet.\u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system that can be manually released using the integrated PRV. Rubberized protection on the gauges protects them from harm.\u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed. \u003cbr\u003e\u003cbr\u003eThe outlet is a 1\/4\" MFL connection (right hand thread) that is equipped with a Duotight Food Grade Plastic (Push-In) Fitting - 1\/4\" FFL X 5\/16\" (8mm).\u003cbr\u003e\u003cbr\u003eDuotight fittings are designed to work by simply pushing in the compatible tubing. \u003cbr\u003e\u003cbr\u003eInside each fitting are dual EPDM o-rings that provide superior sealing capacity due to having twice the sealing surface area when compared to other push in fittings. This makes Duotight fittings even more reliable and significantly reduces the chance of a leak.\u003cbr\u003e\u003cbr\u003eFor optimal performance it is recommended that when cutting your tubing it is cut straight, not on an angle, this helps to ensure a complete seal.\u003cbr\u003e\u003cbr\u003eMeant to be used with 5\/16\" OD (8mm) Polyethylene Tubing.  \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in pressure relief valve that can be manually released\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Chrome Plated Finish. Can handle Co2 and Mixed Gasses\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003e1\/4\" MFL Connections (right hand thread)\u003c\/li\u003e\n\u003cli\u003eDuotight Food Grade Plastic (Push-In) Fittings - 1\/4\" FFL X 5\/16\" (8mm) x 1\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 20 PSI\u003c\/li\u003e\n\u003cli\u003eEasy grip knob for easy adjustments\u003c\/li\u003e\n\u003cli\u003eRubberized gauges for extra protection\u003c\/li\u003e\n\u003cli\u003e0-100 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-4500 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e6 3\/4\" Wide\u003c\/li\u003e\n\u003cli\u003e7\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e                          ","brand":"Duotight","offers":[{"title":"Default Title","offer_id":40684679790677,"sku":"mk4-dual-gauge-multi-gas-reg","price":109.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/61422-1-v2.jpg?v=1750791521"},{"product_id":"pr-2p-t-bar-5-16in-30-3000lb","title":"Taprite Dual Primary 2P T-Bar Low Pressure Co2 Regulator (Zinc Bonnet, 30 PSI \u0026 2000 PSI) [3752-BR-30MT]","description":"Premium Taprite Dual Product Dual Pressure T-Bar Low Pressure Regulator. NSF Approved -- Approved for use by all major breweries. Manufactured in the USA. \u003cbr\u003e\u003cbr\u003eSolid brass body with extra long nipple. Regulator has \"shut down\" safety system (blow off at 55 to 60 PSI.) Permanent Quad-Ring Seal on inlet nipple helps eliminate a source of leaks -- no need to use a new fiber washer each time a tank is changed. Heavy duty UL rated dual gauges. Left hand (LH) threaded ports with CGA 320 shank and nut. \u003cbr\u003e\u003cbr\u003e The bonnet is made from industrial zinc which can handle higher pressures. The regulator is approved for CO2. \u003cbr\u003e\u003cbr\u003e This particular regulator has a T-Bar that allows for easy and exact adjustments to your pressure. The Dual Body Regulator is the perfect choice for those who want to keep different pressures on different beer styles. Also used for serving and carbonating simultaneously off the same CO2 tank.\u003cbr\u003e\u003cbr\u003eFeatures a \u003cspan style=\"background-color: initial;\"\u003e5\/16\" OD barb shut off valve with check (Right hand thread)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003ci\u003e\u003cspan style=\"font-weight: bold;\"\u003eOntarioBeerKegs is an official distributor of Taprite.\u003c\/span\u003e\u003c\/i\u003e \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003eT-handle to adjust pressure\u003c\/li\u003e \t\u003cli\u003eTo protect dispensing systems each regulator has a built-in high volume external safety relief valve factory set to relieve at 55-60 PSIG. Alternatively it has a integrated manual pressure relief valve.\u003c\/li\u003e \t\u003cli\u003eInternal relief valve opens if the delivery pressure exceeds set pressure by 15 PSIG. This serves as a warning that the seat or diaphragm may be worn and require replacing.\u003c\/li\u003e \t\u003cli\u003eForged brass body for greater durability. Body has enough mass to serve as a heat sink to help prevent freeze up. Can handle Co2.\u003c\/li\u003e \t\u003cli\u003eDurable Zinc Bonnet will not strip or break like polycarbonate (plastic)\u003c\/li\u003e \t\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e \t\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e \t\u003cli\u003e5\/16\" OD barb shut off valve with check (Right hand thread)\u003c\/li\u003e \t\u003cli\u003eWorking Pressure Range 0-50 PSI\u003c\/li\u003e \t\u003cli\u003eFront loading seat assembly is easily replaceable in the field\u003c\/li\u003e \t\u003cli\u003e0-30 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e \t\u003cli\u003e0-2000 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e \u003c\/ul\u003e \u003cbr\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\t\u003cli\u003e10\" Wide\u003c\/li\u003e \t\u003cli\u003e7 1\/2\" Tall\u003c\/li\u003e \u003c\/ul\u003e ","brand":"Taprite","offers":[{"title":"Default Title","offer_id":40684700172373,"sku":"pr-2p-t-bar-5-16in-30-3000lb","price":266.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/60815-1-v2.jpg?v=1750791007"},{"product_id":"mk5-tool-free-regulator","title":"Kegland Multi-Gas 1-Way Primary Co2 Tool-Free Regulator (100 PSI, 4500 PSI) - 5\/16\" (8mm) [MK5]","description":"\u003cspan style=\"font-weight: bold;\"\u003eProduct Code: KL30687\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eThis primary Co2 regulator is the newest generation of Kegland’s dual-gauge regulators, offering improved build quality, tool-free adjustment, upgraded seals, and enhanced over-pressure protection. It features a chrome-plated brass body with a standard Co2 CGA320 inlet. \u003cbr\u003e\u003cbr\u003eThe redesigned tool-free adjustments allow one-handed tightening onto the Co2 cylinder. Thanks to the hand wheel and new spigot-seal design, no spanner wrench is required as the seal compresses easily without risk of damage or leaks. \u003cbr\u003e\u003cbr\u003eSelf-servicing has also been greatly improved. A vice or specialized tools are no longer needed. The internals have been reduced in size and are now accessible directly from the rear plate. You can disassemble and clean the regulator using only a simple Allen key if contaminants enter the system. \u003cbr\u003e\u003cbr\u003eThe seat cap has been completely redesigned and is now made from ultra high molecular polyethylene, making it significantly stronger and more resistant to wear and damage. \u003cbr\u003e\u003cbr\u003eThe regulator has a \"shut down\" safety system that can be manually released using the integrated colour coded PRV. Rubberized gauge protection helps prevent impact damage, while the thicker steel gauge bodies add further durability. \u003cbr\u003e\u003cbr\u003ePrimary regulators are designed to be directly hookup up to your CO2 tank providing a way to reduce the high pressure of gas being dispensed. \u003cbr\u003e\u003cbr\u003eThe outlet is a fully integrated ball valve with check that is equipped with a Duotight (Push-In) 5\/16\" (8mm) connection.\u003cbr\u003e\u003cbr\u003eDuotight fittings are designed to work by simply pushing in the compatible tubing. \u003cbr\u003e\u003cbr\u003eInside each fitting are dual EPDM o-rings that provide superior sealing capacity due to having twice the sealing surface area when compared to other push in fittings. This makes Duotight fittings even more reliable and significantly reduces the chance of a leak.\u003cbr\u003e\u003cbr\u003eFor optimal performance it is recommended that when cutting your tubing it is cut straight, not on an angle, this helps to ensure a complete seal.\u003cbr\u003e\u003cbr\u003eMeant to be used with 5\/16\" OD (8mm) Polyethylene Tubing. \u003cbr\u003e\u003cbr\u003e\u003chr\u003e\u003cspan style=\"font-weight: bold;\"\u003eSpecifications:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eTo protect dispensing systems each regulator has a built-in colour coded pressure relief valve that can be manually released\u003c\/li\u003e\n\u003cli\u003eForged brass body for greater durability. Chrome Plated Finish. Can handle Co2 and Mixed Gasses\u003c\/li\u003e\n\u003cli\u003eCGA320 Inlet (Left hand thread)\u003c\/li\u003e\n\u003cli\u003eBody parts are 1\/4\" NPT\u003c\/li\u003e\n\u003cli\u003eDuotight (Push-In) Ball Valve with Check - 5\/16\" (8mm) x 1\u003c\/li\u003e\n\u003cli\u003eWorking Pressure Range 0 - 20 PSI\u003c\/li\u003e\n\u003cli\u003eTool-free Design\u003c\/li\u003e\n\u003cli\u003eThick Steel Gauge Bodies\u003c\/li\u003e\n\u003cli\u003eEasy grip knob for easy adjustments\u003c\/li\u003e\n\u003cli\u003eM6 Mounting Holes\u003c\/li\u003e\n\u003cli\u003eRubberized gauges for extra protection\u003c\/li\u003e\n\u003cli\u003e0-100 PSI low pressure gauges (Right Hand Thread)\u003c\/li\u003e\n\u003cli\u003e0-4500 PSI high pressure gauge (Left Hand Thread)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cspan style=\"font-weight: bold;\"\u003eDimensions:\u003c\/span\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e7 1\/2\" Wide\u003c\/li\u003e\n\u003cli\u003e7\" Tall\u003c\/li\u003e\n\u003c\/ul\u003e       ","brand":"Kegland","offers":[{"title":"Default Title","offer_id":42152604532821,"sku":"mk5-tool-free-regulator","price":142.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/2045\/5257\/files\/62921-1.jpg?v=1771359906"}],"url":"https:\/\/www.canuckhomebrewsupply.com\/collections\/co2-regulators.oembed","provider":" Canuck Homebrew Supply, Canada","version":"1.0","type":"link"}